Automotiveload480

• Vag Com 11.11 Driver Windows 10
• Kkl Vag-com 409.1 Driver Windows 10 Download
• Vag Com Kkl Driver Windows 10

I've even had trouble with this cable plugged into my computer, (cause i have two 3.0 drivers and two 2.0) Windows cant find a serial driver for this. I found a website that tried to make the driver work as a com1,2,3, or 4 port. But computer keeps failing to install the new driver. If i could find a driver for this cable that would be a nice. VAG-COM KKL 409.1 OBD2 USB CABLE DRIVER (vagcom7577.zip) Download Now. VAG-COM KKL 409.1 OBD2 USB CABLE DRIVER. KKL Vag com 409.1 USB performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. You have been completed the task of Browse and add 3 products to cart. USB KKL VAG-COM 409.1 is obd2 repair tool work with a computer. These drivers are compatible with Windows 2000 and newer. They should work with W2K, XP-32, XP-64, Vista-32 and Vista-64. We do not have any VCP drivers for Windows 98! Unzip the contents of the download into a new folder. With an interface plugged in, find it in Device Manager, right-click it, and select Update Driver.

STEP 1: Install Ross-Tech VCDS Software

DO NOT plug VAG-COM cable into computer yet.

Uninstall any other VCDS versions, if present on computer. Then delete c:Ross-Tech folder.

Install VCDS software. (Leave original installation path)

When install is complete, do not launch VCDS.

Exit the Installer.

STEP 2: Plug VAG-COM Cable Into Computer

Plug VAGCOM cable into any USB port.

Windows will install drivers automatically.

If driver install fails, skip to Troubleshooting.

STEP 3: Disable Internet & Launch VCDS Software

Golden Rule: Must disconnect from internet everytime before launching VCDS, else will say 'Interface not found'. Also, do NOT update the software.

Read golden rule above?If yes, then..

Launch VCDS software from Start Menu. Or from C:Ross-TechVCDSVCDS.exe

Go to: Options » Test (leave it as USB)

It should show 'Port Status: OK':

Vag Com 11.11 Driver Windows 10

Click 'Save'.

You're now ready to safely scan your car!

STEP 4: Disable Update Nag on Startup

Start > Startup > Right-click 'RT-Updater' > Delete

Troubleshooting:

You are here because when you inserted VAG-COM cable for first time, Windows failed to install drivers properly.

Expand:

SOLUTION 1:

Leave cable connected to computer. Restart computer. It should be fixed now. Go to Step 3.

SOLUTION 2:

VAGCOM cable should be connected to computer.

1) Go to Control Panel.

Kkl Vag-com 409.1 Driver Windows 10 Download

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

2) Expand 'Ports (COM & LPT)' or 'Universal Serial Bus Controllers'.

You're looking for a device that has name 'Ross-Tech' in it. It will have a yellow mark next to it like this:

Here's an example: OR it may show as 'Ross-Tech Direct USB Interface'.

3) Right-click on this device with the yellow mark » Update Driver Software.

4) Choose 'Browse Computer for Driver Software'.

5) Browse to: 'C:Ross-TechVCDS'. It should look like this:

6) Click 'Next'. When you get below message, choose 'Install this driver software anyway'.

When driver installation is complete, disconnect cable from computer. Restart computer.

When you're back in Windows, you may connect cable into computer, and go to Step 3.

SOLUTION 3 :

Vag Com Kkl Driver Windows 10

If after SOLUTION 2, cable is still showing a Yellow mark (), then you're likely on Windows 8, 8.1, 10 or above.

In this case, disconnect cable.

And disable driver signature enforcement. Here's how: Windows 8/8.1|Windows 10

When done, go to Step 3.

Notes:

• DO NOT update the software to latest version, else it will not work. Only works on current version.
• If you bought your VAG-COM cable from us, then registration is not needed. It's already registered/licensed.